Matek FCHUB-6S Hub PDB Power Distribution Board with 184A Current Sensor 5V & 10V BEC for RC FPV Racing Quadcopter

USD 0.00
farbe
Stock OUT OF STOCK
The PDB distribution power from a 3-6S Lipo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receivers, Flight Controllers, Video Transmitters, LEDs, etc. It also has buit-in 184A current sensor and offers a FFC socket to connect the Matek flight controller conveniently. Its exquisite workmanship and high efficiency enable you to get an unforgettable experience.

Features:
- Built-in 184A current sensor
- Max. 27V input w/ TVS protection
- 5V&10V output LED indicators & Short circuit tolerant
- Total 4 pairs ESC solder tabs are fixed for X Type frame
- PDB: 4 * 30A (4 * 46A, 5 seconds), 4 layers * 2oz copper PCB 
- BEC 5V@1.5A (Max. 2A) w/ 100uf panasonic POSCAP filter  
- BEC 10V@1.5A ( Max. 2A) w/ 47uf TDK MLCC filter

Specification:
Brand Name: Matek
Model: FCHUB-6S
Item Name: Power Distribution Board with Current Sensor
Size: 46 * 36 * 4mm with 30.5 * 30.5mm Mounting Hole
Item Weight: About 9g
BEC Output: 5V & 10V

5V BEC Output:
- Designed for RC Receivers, Flight Controllers, OSD and Servos.
- DC/DC synchrous buck regulator
- Voltage: 5.0V (4.9-5.1) DC  
- Current: 1.5A (Max. 2.0A 10S/minute)
- Short-circuit tolerant (2 Seconds/minute)

10V BEC Output:
- Designed for VTX or FPV Camera
- Voltage: 10.0V (9.8-10.2) DC  
- Current: 1.5A (Max. 2.0A 10S/minute)
- Short-circuit tolerant (2 Seconds/minuate)
- 10V can be used to power cameras labeled as 12V
- The 3S Lipo input voltage should be 11V plus

Current Sensor Module  
- Max. Range: 184A
- 3.3V ADC
- Scale the output voltage to milliamps (1/10th mW/A): 179

Kindly reminder: 
There could be a few deviations due to manual measurement. Thank you for your attention

Package information:
Package size: 9.5 * 8 * 1cm / 3.75 * 3.15 * 0.39in
Package weight: 14g / 0.5oz
Poly bag package

Package included:
1 * FCHUB-6S PDB Board
1 * bag of screws